BSC Power 6258, 62-cc Petrol Chainsaw with 22 inch Guide Bar for Landscaping, Wood Cutting/Logging and Tree Felling

Specifications

• Brand: BSC
• Power : 2.6 kw
• Fuel Used : Petrol
• Displacement : 62 cc
• Stroke : 2
• Weight (Approx.) : 9 kg

• Model No. : BSC 6258
• Product Type : Petrol Chainsaw
• Brand : BSC
• Fuel Capacity : 550 ml
• Fuel Consumption : 1 litre / 45 minutes to 1 hour
• Guide Blade : 22 inches (55.88 cm)  Approx.
• Speed : 8000 RPM

• This professional Chainsaw is designed for highly demanding conditions where efficiency is of prime importance
• It combines high power, low weight and rapid acceleration
• It has 62 cc displacement
• It has 2.6 kW power

• Easy to operate
• Heavy-duty, long-lasting use
• Suitable for both domestic and professional environments.

• 1 Unit Chainsaw
• 1 Unit Chain
• 1 Unit Guide Bar
• 1 Unit Guide Bar Cover
• 1 Set Toolkit
• 1 Unit Oil Measuring Can
• 1 Unit User Manual

Before you start :   

> Check the petrol (fuel) supply and add petrol if required.     

> Take all the necessary safety precautions.       

Starting the engine :     

> Check the chain brake and engage it so that the chain don't move while operating.     

> Turn the on/off switch to the "on" position and open the choke.    

>Press the fuel primer button several times to fill the fuel from the tank into the carburetor.     

> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.      

> Adjust the choke to the “run” position once the engine is running.     

> Allow the engine to be idle for about a minute to get warm and start working.     

> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.